(b) Where interval metering installations assign alarms to the data channel and the interval metering data concerned, the MDP must process the alarm along with the metering data as part of the required Validation. [...] Validations during collection of accumulated metering data The Validations to be performed by MDPs responsible for the collection of accumulated metering data are as follows: (a) The value of metering data from the current Meter Reading ≥ the value of metering data from the previous Meter Reading. [...] Verification for metering installations with accumulated metering data MDPs must carry out the following Verifications, following any changes to a metering installation and prior to the distribution of any accumulated metering data to AEMO or Registered Participants for the purposes of settlements: (a) The metering data correctly pertains to the registered metering installation. [...] Validations for metering installations with check metering or partial check metering MDPs must undertake the following Validations by comparing the metering data and check metering data for all metering installations that have associated check metering installations or partial check metering installations: (a) For metering installations where the check metering installation duplicates the metering. [...] (d) For connection points where SCADA data is made available by AEMO for the purposes of Validation, the MDP must Validate the metering data by comparison of the interval metering data against the SCADA data as provided by AEMO in the agreed format: (i) The MDP must construct a Validation algorithm within the metering data services database that will facilitate comparison of interval metering data.
- Pages
- 63
- Published in
- Australia
