WEM Procedure: Reserve Capacity Testing - Approved for distribution and use by:

If a Facility or Separately Certified Component fails a Reserve Capacity Test, AEMO will: (a) notify the Market Participant that the Facility or Separately Certified Component has failed the Reserve Capacity Test; (b) provide the Market Participant with a copy of the results of the Test; and (c) where the Reserve Capacity Test was a first Test, re-test the Facility or Separately Certified Componen. [...] If a Facility or Separately Certified Component passes the Reserve Capacity Test, AEMO will: (a) notify the Market Participant that the Facility or Separately Certified Component has passed the Reserve Capacity Test; and (b) provide a copy of the results of the Test. [...] AEMO will deem a Reserve Capacity Test to be an Invalid Test if: (a) the temperature measured by the Temperature Measurement System specified in WEMS for the Facility is outside of the range 0°C to 45°C, and paragraph 5.2.3(b) does not apply; (b) AEMO considers that there is an error in the data used to determine the results of the Test, such an error or errors in Meter Data Submissions, including. [...] If a Reserve Capacity Test is deemed to be an Invalid Test under paragraph 5.2.121, then AEMO will: (a) re-conduct the Reserve Capacity Test as soon as practicable in accordance with paragraph 5.1, with consideration to the timelines in clauses 4.25.1, 4.25.4, and 4.25.5; or (b) use the results of the latest Reserve Capacity Test in place of the Invalid Test, where another Reserve Capacity Test ha. [...] AEMO will record the following about Reserve Capacity Tests: (a) information regarding the conduct of the Reserve Capacity Test; (b) the results of the Reserve Capacity Test; (c) the determination of the outcome of the Reserve Capacity Test (passed or failed); and (d) information regarding any action taken in accordance with clauses 4.25.2D, 4.25.4, or 4.25.6, as applicable.