WEM Procedure: Reserve Capacity Testing - Approved for distribution and use by:

If a Facility or Separately Certified Component fails a Reserve Capacity Test, AEMO will: (a) notify the Market Participant that the Facility or Separately Certified Component has failed the Reserve Capacity Test; (b) provide the Market Participant with a copy of the results of the Test; and (c) where the Reserve Capacity Test was a first Test, re-test the Facility or Separately Certified Componen. [...] If a Facility or Separately Certified Component passes the Reserve Capacity Test, AEMO will: (a) notify the Market Participant that the Facility or Separately Certified Component has passed the Reserve Capacity Test; and (b) provide a copy of the results of the Test. [...] AEMO will deem a Reserve Capacity Test to be an Invalid Test if: (a) the temperature measured by the Temperature Measurement System specified in WEMS for the Facility is outside of the range 0°C to 45°C, and paragraph 5.2.3(b) does not apply; (b) AEMO considers that there is an error in the data used to determine the results of the Test, such an error or errors in Meter Data Submissions, including. [...] Where a Market Participant does not provide Meter Data Submissions from Facility Sub- Metering for either the first or second Reserve Capacity Test by the time determined under clause 4.25.2C, AEMO will notify the Market Participant that the Capacity Credits assigned to the relevant Facility or Separately Certified Component will be reduced to zero and the effective date for the reduction. [...] AEMO will record the following about Reserve Capacity Tests: (a) information regarding the conduct of the Reserve Capacity Test; © AEMO | 1 October 2024 Page 14 of 17 WEM Procedure: Reserve Capacity Testing (b) the results of the Reserve Capacity Test; (c) the determination of the outcome of the Reserve Capacity Test (passed or failed); and (d) information regarding any action taken in accordance.